Frogboy Frogboy

Galactic Civilizations II: Twilight of the Arnor v1.95 coming

Galactic Civilizations II: Twilight of the Arnor v1.95 coming

This week

With the Impulse launch this week along with The Political Machine 2008 release, it's been a busy week. But for our next magical trick, we're also releasing the first significant update to Galactic Civilizations II: Twilight of the Arnor.  You can get a preview of some of the changes here.

You will need to use Impulse to get it. Go here to get Impulse.

78,259 views 76 replies
Reply #51 Top
Yes! Thank You for offering the patch through SDC . :CONGRAT:
Reply #52 Top
I don't see anything on SDC, maybe I'm doing something wrong ?!? I check for application updates and nothing.


Did you try Tools | Settings | Internet | Refresh XML Data?
Reply #53 Top
Yes ... and still nothing. I've downloaded the game when I bought it, so I guess this isn't a network problem, I think. But still, I can't draw any hasty conclusions.
Reply #54 Top
I've updated the game via Impulse ... with no hassle at all. Afterwards I opened SDC and I got the update for ... DA 1.80g.103. I guess I will have to re-archive the game and his expansions in .impulse format, to have it later on, just in case, who knows.
Reply #55 Top
Just did the updates over the last 10 mins via Impulse

Opened Impulse (at this point TA shown as not installed)

- Clicked on update for Political Machine, it restarted.
- On restart it detected an update to Impulse.
- After update it loaded Political Machine update
- By now TA showing as update available.
- TA update installed fine, opened up fine.

Whatever all the updates were, they all installed fine - painless - just needed a short wait between updates for it to do its thing. Whatever the problems were, they are not there now - at least not as at 10 mins ago.

All appeared to work "as designed" no hassles.

Regards
Zy
Reply #56 Top
Twilight 1.95 should be up on both later today if all goes well.


Duh- then, it's my mistake not to be able to find it on the newly installed Impulse! :)

Strangely though, the initial OP claimed it to be ready (lemme check - nope, again my mistake; it clearly says **This week**). Re_duh!
Bof, better soon than never.

Too bad that you fixed the planets listing in the espionage scan to pull out the unknowns from the FOW though... i was getting used to the enhanced spying (but, an exploit) feature.
Btw, the term "enhancing" (for version 2.0) still applies to many other interesting things - i hope, right?
Cuz, i do have a trick or two up my sleeve when it comes to find out what an AI currently builds on their planets by consulting the left-side list panel -- indirectly, defeating the purpose of any exclusive Galactics if i KNOW when to buy it instead of letting anyone else complete it before me.
I'd see or recommend a spying edge for this type of info, also.

And of course, please do not forget my petpeeve - the PQ1-spy_bases! ;)

Many Thanks for the hard work.
Reply #57 Top
Impulse worked fine for me yesterday, the only problem being that it showed T)A as not installed ... so I just let it install it again (on top of the one I already had installed) and went to do something else for a while. Then, today, I got the update for TOA with no problem. It is a nice looking program, and I hope that the bugs are worked out quickly for those who are having problems. I agree with others, howeve, that SD should be kept active alongside of it at least for a while, if that is at all possible.
Reply #58 Top
Twilight 1.95 should be up on both later today if all goes well.

Got it from Stardock Central, installation went smoothly and without any problems. Thanks from a happy customer. :)
Reply #60 Top
Hi

I have been trying to get the Twillight 1.95 from Stardock. But the the latest available is patch 1.91. I have been trying to update the settings like described above, but it doesn't work!

Tools | Settings | Internet | Refresh XML Data?

Can't install Impulse tried and crashed my PC, I have Vista Home.

I hope the patch will be available soon on Stardock. Thanks again for a wonderfull game.
Reply #61 Top
If you have refreshed the xml data, try changing the server.

Tools - settings - Internet - go to the top drop down box and select the other server, there's two, change it to the other one - click ok at the bottom. Then refresh xml data again. Sometimes changing server you are using will sort it out.

It is there, they put it up yesterday.

Regards
Zy
Reply #62 Top
i just installed impulse, which looks pretty nice. i was able to update DA through it but when i went to update ToA, i get this...

my os is xp64
Reply #63 Top
i just installed impulse, which looks pretty nice. i was able to update DA through it but when i went to update ToA, i get this...


Try running Impulse in XP Compatibility mode to do the update.
Reply #64 Top
What OS are you running btw?
Reply #65 Top
I updated with SDC. Thanks.

btw: Do I need to install "heightmaps" for ToA? Or does it just benefit Dl & DA? How large is it? (I seem to remember seeing somewhere that it is on the order of 100mgs)

I'm curious (for future updates) if anyone who installed ToA via CD have any issues with Impulse. I'll probably test this myself soon. (At least I'll know if it recogizes my ToA install.)

thanks again, can't wait to play tomorrow!
Reply #66 Top
i just installed impulse, which looks pretty nice. i was able to update DA through it but when i went to update ToA, i get this...Try running Impulse in XP Compatibility mode to do the update.


i was able to update through SDC. if there is another patch, and i have problems, i'll try what you suggested.

What OS are you running btw?


xp pro 64bit

Reply #67 Top

Or does it just benefit Dl & DA? How large is it? (I seem to remember seeing somewhere that it is on the order of 100mgs

It mostly only benefits DL & DA, and it's very large.  If you're only going to play TA, you should be able to skip it.

 

Reply #68 Top
Personally, I am not a huge gamer. I don't have that much time, and I am picky about the games I play. I have a small group of titles to which I am very loyal, and rarely try to expand it. Although I understand Stardock's push for Impulse from a business standpoint, I currently have no desire or need to install it onto my computer. My belief is that any updates to any Gal Civ 2 title should be available on both Impulse and SDC. Since the majority of users have been upgrading on SDC, it seems self defeating to shut down that avenue of distribution right now. I would even say the same about Sins of a Solar Empire.

Impulse should be the sole distribution channel for new titles going forward, beginning with Political Machine. If and when there is a Gal Civ 3, I would have no argument about changing over to Impulse. But for now, I don't see why I should be forced to do that. I'm sure my demographic represents a small portion of this community, so I don't expect my thoughts to carry much weight, but I felt like voicing my opinion. I'm not knocking Stardock, I'm just saying what I would do if I were in their shoes.
Reply #69 Top
I agree stykman...

I must admit I havn't enjoy reading the posts from people having trouble with impulse, especially that poor dude who said "this is the end for me," on account of his systems incompatability. I hope it has worked out for him now that SDC has been pulled back from the brink.

Sure bring on impulse... I'm sure most of us will get on eventually, but this "have to" business was a bit of a shock, not to mention boring. I'm glad you reconsidered.

Reply #70 Top
... the poor dude is somewhat over 49 and still alive. He heared / read today in an european forum, that stardock finally had decided to distribute the patch also via SDC, and so he looked again into this forum. So all is well, nothing real worse
happens, thanks ubernaught.
And thanks to stardock for their new decision, also thanks for the guys which told their opinion here in this thread, personally I agree 100 % with the last post of stykman22 here.

Maybe the sound of my last post was a little bit too dramatically, that can happen with Sinatra sound in background, and worse foreign language skills.
I haven't tried to download the patch until now, will give it a chance tomorrow. The weather was to fine last days to sat in front of a pc. And frankly said, the nearby European Soccer Championship was also more attractive for me.

For now a good night from old europe or better said have a nice day.
Reply #71 Top
You can disable the toolbar from msconfig -> StartUp -> Impulse Dock. That way it won't autoload when you enter windows.
Reply #72 Top
Just Right Click anywhere on the Dock, uncheck "run at startup"

Regards
Zy
Reply #73 Top
The whole deal with the Impulse thing was advertised as "wow, now you dont have to hassle with several different download applications, no cds etc". But in the end, all you are doing is replacing one download-app with another.. No difference from say Stardock Central, Gamersgate, Steam or even the horrible EA Downloader.

Yes it runs better, looks better, has better functions etc.. But its still just another download app that i never ever even open until i want to check if there's an update or not.
Why would i when i can just click the game-icons on my desktop, and why would i want to surf the forums in that application when i can just do the same in my webbrowser i already have stuff set up in? :P

And lastly, saying that you NEED to download Impulse in order to get the latest patch, is just what made me write this post. Yes i did download it, no it doesnt suck. But its still the same as every other app you "HAVE TO" download in order to get what you want.
A simple update-button ingame wouldnt be hard enough, would it? ;)
Reply #74 Top
I recently downloaded the new Impulse client and am having some trouble getting Gal Civ 2 to download or update as I get this error message: Conversion from type 'DBNull' to type 'Date' is not valid.
The other products (Sins, DA) seem to work perfectly it is just the original game which throws this error.
Any help would be much appreciated.
Thanks.
Reply #75 Top
Stardock -

Question - I have installed v.195.023 but in the opening screen when I start ToA it says v. 1.91 still. Also, when I start the game the starports are still the old graphics - I thought they had been updated. It makes me wonder if I really updated to v1.95.023 - but stardock central says it is. Any help would be greatly appreciated. Just want to make sure I am playing hte updated version because I am playing on an immense galaxy and want to make sure I am playing hte version with the research bug fixed.